05 – Terminator Captain

I have to admit I approached this model with a little trepidation as the captain wasn’t wearing his helmet, which meant i’d have to paint some flesh. I’ve always shied away painting flesh as there tends to be no middle ground in that it either looks good or crap.

So with this in mind I cracked open the various flesh shades contained in the Scale 75 Scalecolour range, Pink Flesh, Basic Flesh, Golden Skin, Light Skin, Pale Skin, along with Citadel’s Lahmian Medium and Reikland Fleshshade.

CkHTUedWYAIA9X6.jpg

I started with a base layer covering of thinned Pink Flesh. It took a few coats to get the colour uniform.After that it was just a case of building the highlights up but instead of thinning the paint with thinner I used the Lahmian Medium as I’ve found this is great for blending. After I’d added the first highlight of Basic Flesh I used a thinned wash of Reikland Earthshade just to pull the blends together. I then highlighted further with Golden Skin, Light Skin and a final highlight on Pale Skin. In between these layers I added every increasing thinned layers of Reikland where needed.

CkIG0qyXAAAab-6.jpg

After the flesh was painted I thought I’d try my hand at adding some details. Firstly with a really light purple mixed with a little Pale Flesh I started to pick out the veins in the head. It took my ages to do this but sadly I couldn’t get the camera to to pick them out.

After this I started on the facial and head stubble. This was done by mixing a light grey with some pale skin and applying it to the correct areas. Applying several coats made the hair look thicker. Once the hair was dry I applied a super thin wash of pale skin mixed with Lahmian to pull the colours together.

ClAxX-sXIAAjCmA.jpg

The only other thing of real note that I did differently on this model was to add some Emperor’s Children transfers to the cape as I wanted the cape to show the prestige of the Captain. The transfers were added using Micro Set and Micro Sol which is a must purchase if you’re adding transfers (I have a blog on Micro Sol and Micro Set in the pipeline). Once the transfer where set I added a layer of anti-shine, see here.

Cl_G3sFWEAYPuMo.jpg

Cl_G2cHXIAEpxz3.jpg

I’ll add some piccies later once I’ve finished the base!

Sale 75 – Scalecolour

scale-75.jpg

Last Christmas my wifey bought me the Scale 75 Colour Collection. The Colour Collection contains all the 63 ‘basic’ range colours that Scale 75 produce and it also comes with a large aluminum paint tray that can hold 70 bottles of paint. The paint colours are as follows:

This slideshow requires JavaScript.

The images above where taken from PaintRack app (see here for further details), it’s also worth noting that the Inktensity, Viking Gold and the Alchemy paints, although are Scale75 paints, are not part of the Colour Collection set but I have them listed in the slides above as they’re part of my Scale75 paint collection.

So after nine months of using the paints I thought it was about time that I wrote up my experience . The ScaleColour range is listed as having a ‘super matte finish’ and I have to admit that the paint finish is matte to the point of being almost chalky. Now I don’t want you to think chalky is in anyway bad it’s just that the ScaleColour has a really soft pastel finish to it which makes it ideal for blending. This chalky pastel colour range is fantastic for the foundation paint collection but there have been times where I’ve needed a really vibrant colour and I’ve had to use either a Citadel or Vallejo paint. To tackle this I’ve picked up the Scale75 Inktensity range to see if this will add some vibrancy when needed. I also expect that Scale75 Fantasy  & Games Collection will fill this gap. If Scale75 start selling the fantasy paint separately then I’ll pick some up to test but at the moment I don’t want to sink £118 into more paints.

Another thing that caught me out when I first came to use the paints is that each paint has a seal that needs to be broken before you can start using them. I presume this is to keep the paints fresh whilst they sit on a shelf in shop or a warehouse but if you’re not expecting it you can waste a few minutes wondering why no paint is coming out of the bottle when you’re squeezing it.

I also found that all the paints need a shake before use, and I mean a really good shake. One thing that did surprise me about the paint was how thick it is which means you only need a small amount, mixed with thinner, to go along way. In terms of thinner I’d really recommend the Scale 75 thinner as it seems to thin the paint Sioux diluting the pigmentation of the paint.

I’ve used the paint with a brush and also ran it through a paint brush and the coverage is great in both instances. Below is a picture of some Tomb Kings and Emperor’s Children that I’ve painted using the paints, I’m not the best painter but you get the idea.

IMG_3808

DSC_0816

In conclusion I really love these paints, they have a lovely soft, chalky, matte look to them. They provide good coverage but they do need to be thinned. They’re a quality product.