Paint Killing

Whilst working on my EC chaplin’s cloak I noticed that some of the paint was starting to the rise off the model. I imagine that something stopped the base layer and the highlights from drying properly.

Using a brush and some water I managed to get most of the paint off the cloak but there were still some stubborn areas of paint left. As I wanted the cloak to be as smooth as possible these had to go before I repainted the cloak.

image

If I could avoid it I didn’t want to strip the rest of the paint off the model so I decided that I’d give Scale 75’s aptly named ‘PaintKiller’ a try.

image

Before buying the Paintkiller, from Elment Games, I did a few internet searches for reviews and couldn’t find any. Now I’ve been using the Scale 75 Scale Colour range, and they’re excellent, so this gave me some confidence that the PaintKiller would be a quality product.

The other day my Paintkiller arrived and I have to say I was fairly excited, well as excited as a grown man get over a bottle of clear liquid that wouldn’t get me intoxicated if drank it. Now one thing I’ve learnt in the few years I’ve been modeling is to always read the instructions and in this instance I’m glad I did as Paintkiller can only kill paint on resin or metal products. I have to say this came as a bit of a blow as I was after a miracle product that would remove paint from a plastic model.

image

The other reason I was a little bit narked was that I’d checked both the Scale 75 website and the retailers site and there was no mention on either about the restrictions on use. For my part I was probably being a little naive by thinking that a 100% plastic model safe paint stripper had been developed but I live in hope.

I do have a resin Dreadnaught that needs stripping and given an EC colour scheme so I can use the paint killer on that but for the plastic Chaplin I’m unsure of what to do. I will probably try cleaning the cape up a little more and then re-paint the cape OR I could find a plastic safe method of stripping the whole model and paint it all again OR as a last resort buy the model again from eBay as everyone is splitting the sets up.

 

Epilogue

Test 1 – Plastic

So the other night I thought ‘fuck it, I’m going use that Paint Killer on the Chaplin” so I made a little PaintKiller bath, dunked him and watched in amazement as the paint just fell off him within seconds. I used an old toothbrush to get to the paint in the creases of the model but other than that it needed no help. As you can see from the piccy the model hasn’t melted, exploded or gained superpowers. In short I’m super impressed with Paintkiller on a plastic model! Oh Scale 75 I think I love you…. please don’t break my heart because you have it now.

DSC_0693-01 [217613]

Test 2 – Resin

I picked up a Contempator Relic Dreadnought when I first got back into the hobby, it was, and sadly still is my biggest Forgeworld purchase which will now obviously change as I’ve started collecting Emperor’s Children. I don’t know if I got over excited by painting a Forgeworld model but in short I really messed the paint job up. I wasn’t happy with it at the time and each time I’ve looked at it since it seems to have gotten worse (like some 30k picture of Dorian Grey, oh wait that story has already been plagerised in Fulgrim).

image

From my earlier Paintkiller plastic test I had around 3/4 of the bottle left which I poured into a disposal cup and then I part submerged the model. I let the dread soak for around five minutes after this time I took the model out and turned him around so that the other area would get chance to soak. I then started to work on the model with a tooth brush.

image

As you can see the paint comes off easily, even if I does look like an alien that’s just burst from your stomach. The only issue I had was that the PaintKiller quickly became saturated with paint so that everytime I dipped the brush I inadvertently added a thin wash off diluted paint and Paintkiller over the model. This wasn’t a big issue but it did make it hard to see were the stubborn bits of paint were.

It took a bit of scrubbing to get the paint off especially in the model recesses but eventually it moved. Once the model was scrubbed I rinsed it under the tap. If I’m honest, the model could probably do with another wash to get rid of the odd red tint but I’m hoping that when I apply the base coat there will be no hint to its former life.
image

Overall, I’m really happy with the Paintkiller as it removed all the paint on both plastic and resin without destroying the models or any details. As plastic is not listed on the instructions as being safe to use with Paintkiller then I would be very careful if you do use it on plastic. Add a little, don’t leave it to soak and scrub with a brush.

On a final note please wear gloves when using this stuff as your skin will melt.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s